Recktronic Devices And Systems

Water Treatment

wt10

An extensive instrumentation and control system along with SCADA can make a substantial difference in the day to day water management systems of towns and cities.


Allowing the utility engineers a “ Real Time” insight into the water supply system from the reservoir or dam where the water is picked up to the final water billing system for the consumer.

Coupled with real time hydraulic modeling software solutions help the utility manager in analysing the flaws and areas of improvement along with better future up gradation

RDS enables multi technology multi platform end to end real time solutions enabling accountability and profitability to the Utility

Water Treatment

Stage I : Aeration

Scope of Automation:

  1. Measurement of (online flow) quantity of incoming water
  2. Analysis of quality of incoming water (Online measurement of PH, Turbidty)

 

Benefits:

  1. Chemical Dosing ratio calculations on basis of in coming water quality and quantity
  2. Dosing on basis of final achieved water quality parameters and water storage at purified water storage
chemical dosing

Stage II : Chemical Dosing

Scope of Automation:

  1. Dosing of chemicals as per the quantity and quality of incoming water using diaphragm dosing pumps.
  2. Automated mixing of chemicals

Benefits :

  1. Dosing on basis of final achieved water quality parameters and water storage at purified water sump
  2. Automated mixing of chemicals

Stage III : Clarifier (Flocculation & Sedimentation)

Scope of Automation:

  1. Operation of the flocculators
  2. Operation of the Sludge Removal Valves

Benefits :

  1. Improved efficiency of the clarifiers
Canal Automation Solutions
Filtration-

Stage IV : Filtration

Scope of Automation:

  1. Monitoring of the level of the filter beds
  2. Monitoring of rate of flow and drop in differential pressure
  3. Operation of the valves (Inlet, Backwash, Outlet, Air inlet and Drain)

Benefits :

  1. Improved efficiency of the filters, back wash at pre specified process parameters

Stage V : Disinfection

Scope of Automation:

  1. Dosing as per requirements
  2. Monitoring of residual level of chlorine in purified water

 

Benefits :

  1. Improved dosing and maintenance of residual chlorine levels
Disinfection
Distribution

Stage VI : Distribution

Scope of Automation:

  1. Measurement of (online flow) quantity of incoming water at ESR/ MBR
  2. Measurement of real time water level at ESR / MBR
  3. Real Time Hydraulic Analysis of Pipe Line System
  4. Measurement of Water Quality of Water at Storage / Key Points

 

Benefits :

  1. Real Time Audit ( Flow& Level)
  2. Pressure Monitoring at Key points
  3. Water Quality Verification

Contact Us

Anoop Nambiar